NEED HELP?
Our team are always happy to answer questions or provide advice.
Live Chat: Available from the bottom right of your screen.
Email: sales@highperformancepolymer.co.uk
Phone: 01865 684080
PRICE MATCH PROMISE
HPP price match against all UK suppliers. Found it cheaper? Contact us and we will beat it!
REQUIRE A QUOTE?
Simply add the required product(s) to the shopping cart and select 'request for quotation'.
WORLDWIDE SHIPPING
We ship worldwide! Same day dispatch for all express products ordered before 3PM GMT.
PPS Countersunk Screw Dimensions:
(mm) | M2 | M3 | M4 | M5 | M6 |
---|---|---|---|---|---|
Pitch | 0.4 | 0.5 | 0.7 | 0.8 | 1.0 |
Dia | 2.1 | 3.2 | 4.3 | 5.3 | 6.4 |

PPS (Polyphenylene Sulphide)
Countersunk Screws
All PPS (Polyphenylene Sulphide) countersunk or ‘Flathead screws featured on our website comply with DIN 965 specification.
Countersunk screws are manufactured with a standard Phillips cross head drive type (ranging from drive #1 to #3), this allows for more than adequate torque to meet specification.
The standard head angle for all our countersunk screws is 90 Degrees.
Why use PPS?
PPS screws are reinforced with 40% glass fibre, this enables tensile strengths that are similar to our PEEK GF30 (30% glass-fibre reinforced) range, however with a much larger range of sizes and with reduced cost.
PPS has characteristics that are positioned perfectly between our RENY and PEEK range.
Key Properties:
Exceptional chemical resistance
PEEK screws can only be dissolved in high concentrations of Nitric and Sulphuric acids.
Exceptional dimensional stability
Even at high temperatures (260°).
Low Radio Frequency noise
Comparable to air.
Excellent weight to strength ratio
Specific gravity (1.30).
- High heat operation (260°C)
- High tensile strength (97mpa)
- Ultra low weight
- Flame resistance
- Abrasion resistance
- Hydrolysis resistance
- Highly resistant to radiation
-
Non-Magnetic
- Very low outgassing
- Low thermal conductivity
- Non-Corrosive
- Food safe (FSA/FDA Approved)
Exceptional tensile strength
185 MPa Standard.
Exceptional dimensional stability
Even at high temperatures (200°).
Ideal alternative to PEEK
Encompases charcteristics similar to RENY and PEEK.
Excellent weight to strength ratio
Specific gravity (1.66).
- Operation temperature up to 200°C
- Ultra low weight
- Flame resistance (V-0)
- Abrasion resistance
- Hydrolysis resistance
-
Non-Magnetic
- Low thermal conductivity
- Non-Corrosive
PPS Data Sheet
Follow the link below to view our PPS fastener data sheet. This includes properties such as mechanical, electrical, thermal and chemical resistance.
View Data SheetCertificates Available On Request



Delivery Information
High Performance Polymer deliver all of our products worldwide.
The estimated delivery time is shown above the add to cart button. Please note that this may vary for international customers. For more accurate delivery information, please see our delivery times and prices page.
click on the link below to view further delivery information and our price matrix.
Delivery Times & PricesWhy Choose High Performance Polymer LTD?
50,000+ Fasteners In stock
No long lead times. We have a large range of fasteners available for express delivery (Dispatched the same day if ordered before 3PM Monday-Thursday).
Fasteners not available for express delivery will display the expected delivery date above the 'add to cart' button.
Manufacturer Direct Distributor
We are a manufacturer direct distributor, this allows us to ensure highly competitive prices and keep our shelves stocked. All of our products are manufactured to the highest standards and exhibit exceptional characteristics.
ISO9001 Certified
Certified through Quality Veritas. High Performance Polymer conforms to the ISO9001 quality management system. Certificates available on request.
Material Certificates
HPP offer full material traceability and can provide certification confirming the material data and raw material batch number, which can be traced back to the manufacturer.
Certificate Of Conformity
HPP also offer a product certificate of conformity, confirming the product manufacturing standard and material.
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.
- Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device